problem with my 7900xtx

[five]

Hello. AMD/ATI Pixel Clock Patcher 1.4.14 not working for me i have adrenalin version 24.3.1. I have AMD Radeon rx 7900 xtx. When i try to run it it says "failed to locate driver file" i have installed drivers many times. and unistalled them with DDU. Sometimes when i start my pc windoes doesnt detect my gpu and it shows error 43. I read that this pacher can help but i cant run it . Its weird because sometimes this error doesnt show up and everything is good anyone know whats up?

 

[Steevo]

Do you need higher refresh rates?


Can you post or add your hardware specs?

 

[five]

Do you need higher refresh rates?


Can you post or add your hardware specs?

My system spec is
GPU:7900xtx
MOTHERBOARD:gigabit B650 arous elite ax
CPU:razeyn 7 7800x3d
RAM: 32 gigabytes
PSU:1000W
My problem is that every time i trun on my pc my system dose not recognize my GPU and i have to renstall the driver every time
And i have error 43
I read online that amd/patch will help me but it dosent work

 

[Steevo]

That patch is to allow higher refresh rates of monitors AFAIK and won't help with your issue.


It sounds like you need to shut down, take out the GPU entirely, plug it back in and see if that helps.


Where did you plug your monitor into?

 

[five]

That patch is to allow higher refresh rates of monitors AFAIK and won't help with your issue.


It sounds like you need to shut down, take out the GPU entirely, plug it back in and see if that helps.


Where did you plug your monitor into?

I already tried to unplug the gpu and plugged back that didn’t help i have 2 monitors both display port and plugged to the gpu
And i dont know exactly but the say that maybe my GPU have mining firmware that why kepp happening and the patch sould tell my system how to deal with it

 

[Athlonite]

If you don't need the onboard video out of the R7 7800X3D then go into your mobo's BIOS and turn it off
try another HDMI/Displayport cable most issues can be solve by not using cheapo cables (under $10 cable are usually rubbish don't use them)
make sure your using either HDMI 1 or Displayport out on the 7900XTX into your monitor (whichever your monitor supports)

who is the manufacturer of your PSU and it's model/number name would be helpful just saying it's a 1000W psu doesn't tell use much some chepo 1000W PSU's are not what they purport themselves to be ie: they don't have enough current on the 12V rail but have ridiculous amounts on the 3.3V and 5V rails instead

failing the above not working for you then RMA the GPU it's faulty

 

[five]

If you don't need the onboard video out of the R7 7800X3D then go into your mobo's BIOS and turn it off
try another HDMI/Displayport cable most issues can be solve by not using cheapo cables (under $10 cable are usually rubbish don't use them)
make sure your using either HDMI 1 or Displayport out on the 7900XTX into your monitor (whichever your monitor supports)

who is the manufacturer of your PSU and it's model/number name would be helpful just saying it's a 1000W psu doesn't tell use much some chepo 1000W PSU's are not what they purport themselves to be ie: they don't have enough current on the 12V rail but have ridiculous amounts on the 3.3V and 5V rails instead

failing the above not working for you then RMA the GPU it's fault

If you don't need the onboard video out of the R7 7800X3D then go into your mobo's BIOS and turn it off
try another HDMI/Displayport cable most issues can be solve by not using cheapo cables (under $10 cable are usually rubbish don't use them)
make sure your using either HDMI 1 or Displayport out on the 7900XTX into your monitor (whichever your monitor supports)

who is the manufacturer of your PSU and it's model/number name would be helpful just saying it's a 1000W psu doesn't tell use much some chepo 1000W PSU's are not what they purport themselves to be ie: they don't have enough current on the 12V rail but have ridiculous amounts on the 3.3V and 5V rails instead

failing the above not working for you then RMA the GPU it's faulty

Both my diplay port came with the monitor so i gusse the are both good quality i have

Corsair Rm1000X 80 Plus Gold Fully Modular Atx 1000 Watt Power Supply​

 

[Athlonite]

PSU looks good as do the cables so looks like it's down to the VBios just being wrong you could try flashing it with the appropriate one for your GPU but if your not comfortable doing that then RMA it

 

[five]

PSU looks good as do the cables so looks like it's down to the VBios just being wrong you could try flashing it with the appropriate one for your GPU but if your not comfortable doing that then RMA it

Yeah i am not comfortable with flashing and sadly i cant RMA it so that why i want to try amd/ATA picxl that my last try before i give up and flash the gpu

 

[Athlonite]

Yeah i am not comfortable with flashing and sadly i cant RMA it so that why i want to try amd/ATA picxl that my last try before i give up and flash the gpu

That program is not what you think it's for your better off to flash the correct VBios for your GPU then if you can't RMA it it's not hard there is a good guide for how to do it here on TPU' forums

https://www.techpowerup.com/forums/...nd-line-cmd-syntax-mini-guide-windows.291671/

 

[five]

That program is not what you think it's for your better off to flash the correct VBios for your GPU then if you can't RMA it it's not hard there is a good guide for how to do it here on TPU' forums

https://www.techpowerup.com/forums/...nd-line-cmd-syntax-mini-guide-windows.291671/

Then i will have to flash it buy before that I already checked GPUz and my vbios id is the latest version that i found in TPU so if i flash it with the same vbioa is that a bad thing ? If you can help me i will appreciate it

 

[Steevo]

Let's not start flashing Bioss and bricking cards.

How about we deal with the primary issue, it isn't correctly seen by the OS, which is indicative of a poor connection. Flashing a BIOS when everything is working is a gamble, if you attempt it when there is a bad connection you are asking for problems.

Download GPUz and take a screenshot when it is working correctly and see if you can make it fail and take and post a screenshot of that too.

 

[five]

Let's not start flashing Bioss and bricking cards.

How about we deal with the primary issue, it isn't correctly seen by the OS, which is indicative of a poor connection. Flashing a BIOS when everything is working is a gamble, if you attempt it when there is a bad connection you are asking for problems.

Download GPUz and take a screenshot when it is working correctly and see if you can make it fail and take and post a screenshot of that too.

i will try to make it fail and i will come back with picture

 

[DAPUNISHER]

Let's not start flashing Bioss and bricking cards.

Depends on the model. If it has multiple bios OP can try the flash without that worry.

 

[Steevo]

Depends on the model. If it has multiple bios OP can try the flash without that worry.

I am very well aware of those options, but go with me on this.

OP flashes his card and due to a communication issue it fails, then he switches to the other BIOS.

Now his problem isn't fixed, and he has another issue to deal with and the only fallback option is being used.

I can cite the thousands of threads with GPU BIOS flashing issues where other issues were the root cause. But let's first do no harm, get a complete diagnosis before we throw shit at the wall to see.what sticks.

 

[DAPUNISHER]

I am very well aware of those options, but go with me on this.

OP flashes his card and due to a communication issue it fails, then he switches to the other BIOS.

Alternatively, this isn't one of those times, and the flash fixes the issues.

But if you are going to stick around an guide them through this potentially lengthy troubleshoot pro bono good on you. I will leave you to it.

 

[five]

Let's not start flashing Bioss and bricking cards.

How about we deal with the primary issue, it isn't correctly seen by the OS, which is indicative of a poor connection. Flashing a BIOS when everything is working is a gamble, if you attempt it when there is a bad connection you are asking for problems.

Download GPUz and take a screenshot when it is working correctly and see if you can make it fail and take and post a screenshot of that too.

hi sorry it took to long but this the tow picture

 

[Steevo]

What exact model is your card?

 

[five]

What exact model is your card?

7900xtx asrook phantom gaming

 

[P4-630]

And you bought it used?..

 

[five]

And you bought it used?..

No it is a new card

 

[Steevo]

My first recommendation is to RMA it and get a new one.

Just to be sure of your symptoms.

Randomly on cold boot windows fails to load the driver that was installed with a device manager error of 43?

Or after going to sleep/hybernation/low power etc... you randomly get error 43?


EDIT**


For shits and giggles.

https://helpx.adobe.com/substance-3d-painter/technical-support/technical-issues/gpu-issues/gpu-drivers-crash-with-long-computations-tdr-crash.html

Follow this and first see if TDR values are listed in your registry and post what values they are.

Then adjust the values to 60 seconds for both as indicated.

See what happens, also in your Mothorboard BIOS what is PCIe APSM set to?

Lastly what is PCI Express settings in Windows Power settings set to?

 

[five]

My first recommendation is to RMA it and get a new one.

Just to be sure of your symptoms.

Randomly on cold boot windows fails to load the driver that was installed with a device manager error of 43?

Or after going to sleep/hybernation/low power etc... you randomly get error 43?

sadly i cant RMA the card it happen Randomly some days is the error dose not happen

 

[P4-630]

No it is a new card

sadly i cant RMA the card

Can't RMA?
Sorry I don't get it....

GL.

 

[five]

Thanks guys for your help i contact the store and played the sympathy card and the agreed to RMA it i hoped that i will find a solution and tried for tow weeks but everybody told me to RMA IT so thank for trying with me